What To Pay Attention To When Choosing The Electric Radiator Fan

September 19 00:12 2020

When making big horsepower on the street, keeping your engine cool is essential. Sitting in heavy traffic with a high horsepower engine, a mechanical fan just won’t cut it. Mechanical fans rely on engine rpm and when sitting at idle, they just don’t spin fast enough to keep your engine cool. Mechanical fans also rob your engine of horsepower and fuel economy since they are driven off the crankshaft. They simply can’t compete with electrical fans when it comes to efficiency. A radiator only works if there is airflow through the radiator core. An electrical fan provides constant airflow even when the engine is idling, when your engine needs it the most and since they are electric, they do not affect engine horsepower or fuel economy.

When choosing an electric fan, here are a few factors you should be aware of:

Push vs Pull

Electrical fans can either push air through the radiator or pull air through it. A pusher fan sits in front of the radiator. When a vehicle is moving, a pusher fan can obstruct airflow due to its positioning in front of the radiator. A puller fan on the other hand sits right behind the radiator. It pulls air through the radiator and has less impact on airflow at high speeds than a pusher fan since it is behind the radiator. Puller fans provide more cooling capacity than pusher fans. The determining factor on whether to use a puller fan or a pusher fan is the amount of room you have. Always choose a puller fan but if space is an issue then use a pusher fan.

Diameter

When it comes to diameter, you should get a fan that covers as much of the radiator core as possible. Measure the area with the existing fan and shroud removed to find out how much room you have to work with. Larger fans will keep your car idling in the heat for longer period of time without overheating. Always allow some clearance between the fan motor and engine, you do not want these parts touching each other.

Single or Dual Fans

Most of the time a single fan is all you need but if you have added a much larger engine or are making big horsepower, then you may want dual fans to maximize the amount of airflow. If you’re not having a problem with overheating, then a single fan will suffice but if you have made significant upgrades such as a turbo or supercharger then dual fans will help provide the additional airflow needed.

Straight Fan Blades and Curved Fan Blades

Straight and curved fan blades come down to a difference in noise versus airflow. Straight blades move more air but are noisy. On the other hand curved blades are quieter but don’t move as much air so it all depends on your application. If you desire a more quiet fan then the curved is the way to go but if you need all airflow possible, go for the straight blades.

Fan Shroud

To get maximum airflow through your radiator core, you should use a fan shroud. A fan shroud ensures that air is moving through the radiator core and not around it. A radiator is useless without airflow, a fan shroud helps direct air through the core. Make sure you use one in your vehicle.

CFM – Max Airflow

Manufacturers rate fans by CFM. CFM stands for cubic feet per minute so an electrical fan with a 1,500 CFM rating will push 1,500 cubic feet of air per minute. Follow this general guideline:

1,250 cfm for a 4-cylinder

2,000 cfm for a 6-cylinder

2,500 cfm for a 8-cylinder

As a basic rule of thumb, the more power your engine makes, the higher the airflow you want. If your using a turbocharger/supercharger or have a larger engine, then you will want the maximum CFM fan available. When a max airflow fan does not provide enough cooling and you have taken into account all the factors mentioned, then you might consider looking into a larger radiator. Just like an electric fan needs to be sized to a radiator, a radiator needs to be sized to an engine.

Current Draw

Another factor to look at is the current draw. The more current a fan draws, the more airflow it will have. A more powerful electrical fan can draw air through multi row radiators and air conditioning cores. Make sure to get a high performance electric motor that is sealed and prevents contamination from dirt and water. This ensures worry-free performance for years to come.

Be sure to use a relay kit when wiring an electric fan. We have relay kits designed to integrate with OEM wiring. Choose a relay kit with or without a stainless steel electronic sending unit. Sending units offer hands free control of your electric fans, simply choose a sender with the on/off temperatures that best fits your needs.

By taking into account these simple points, choosing the right electric fan for your vehicle will be straight forward and keep your engine happy for years to come.

Media Contact
Company Name: Ningbo Bowente Auto Parts Co., Ltd.
Email: Send Email
Phone: +86-574-55664791
Country: China
Website: https://www.chinacparts.com/

  Categories: